METAMOTO.FUN ROAD MODULE 023: Y FORK
PORTS: N S E

DESIGN TASK:
Three-arm Y fork with gradual 4-inch-width branch and smooth turns; use multi-sheet if required.

METAMOTO.FUN MASTER ROAD STANDARD
Reference: Match existing Road Tile 001 PDF visually and dimensionally.
US Letter portrait 8.5 x 11 inches; vector PDF 612 x 792 points; raster equivalent 2550 x 3300 pixels at 300 DPI.
Two-way ROAD-4 asphalt width EXACTLY 4.00 inches, two 2.00-inch lanes. This is play-friendly, not strictly 1:64 real-world lane scale.
On portrait pages, north/south connection asphalt spans x=2.25 to 6.25 inches, center x=4.25. East/west connection asphalt spans y=3.50 to 7.50 inches measured from top, center y=5.50.
Connection centers N(4.25,0), S(4.25,11), E(8.5,5.5), W(0,5.5), in inches measured from upper left. Ports must be full width and perpendicular to the page edge.
Match original dark asphalt, dashed yellow centerline, thin white edges, gray sidewalks and green grass. No perspective, cars, shadows, or 3D. Keep road paint aligned at joins. On junctions end centerline dashes before intersection.
Include a true 1-inch calibration square in a non-driving location. Do not cover any road port. Preserve road edge continuity.
No margins at connection edges: borderless printing or precise trim to page boundary. Print Actual Size / 100%, never Fit to Page.
DO NOT shrink a 4-inch road to fit a complex design. If the full-size road geometry, safe turns, parking, or structures will not fit, output a numbered multi-page assembly with an assembly diagram and precise cut/align guides on a separate instruction sheet.
Before release verify exact PDF page dimensions, 4-inch port widths, connection positions, calibration square, no clipping, and a physical test against Road Tile 001.

DELIVERABLE: exact-size print-ready PDF plus assembly instructions if multiple sheets. No image-only mockup passed off as print-ready.