Road-building design brief
Parking Lot
Module 026 of 46. This is the source design brief. A printable PDF is available in the collection.
For accurate printing, follow the master standard, print at 100% / Actual Size, and check the calibration square. Also review the parking circulation standard v2 and QA checklist. Fit against Road Tile 001 has not yet been confirmed.
Prompt text
METAMOTO.FUN ROAD MODULE 026: PARKING LOT PORTS: DRIVEWAY DESIGN TASK: Usable 1.5 x 3.5 inch toy-car parking stalls and circulation aisle, driveway connector; multiple pages if needed. METAMOTO.FUN MASTER ROAD STANDARD Reference: Match existing Road Tile 001 PDF visually and dimensionally. US Letter portrait 8.5 x 11 inches; vector PDF 612 x 792 points; raster equivalent 2550 x 3300 pixels at 300 DPI. Two-way ROAD-4 asphalt width EXACTLY 4.00 inches, two 2.00-inch lanes. This is play-friendly, not strictly 1:64 real-world lane scale. On portrait pages, north/south connection asphalt spans x=2.25 to 6.25 inches, center x=4.25. East/west connection asphalt spans y=3.50 to 7.50 inches measured from top, center y=5.50. Connection centers N(4.25,0), S(4.25,11), E(8.5,5.5), W(0,5.5), in inches measured from upper left. Ports must be full width and perpendicular to the page edge. Match original dark asphalt, dashed yellow centerline, thin white edges, gray sidewalks and green grass. No perspective, cars, shadows, or 3D. Keep road paint aligned at joins. On junctions end centerline dashes before intersection. Include a true 1-inch calibration square in a non-driving location. Do not cover any road port. Preserve road edge continuity. No margins at connection edges: borderless printing or precise trim to page boundary. Print Actual Size / 100%, never Fit to Page. DO NOT shrink a 4-inch road to fit a complex design. If the full-size road geometry, safe turns, parking, or structures will not fit, output a numbered multi-page assembly with an assembly diagram and precise cut/align guides on a separate instruction sheet. Before release verify exact PDF page dimensions, 4-inch port widths, connection positions, calibration square, no clipping, and a physical test against Road Tile 001. DELIVERABLE: exact-size print-ready PDF plus assembly instructions if multiple sheets. No image-only mockup passed off as print-ready. REQUIRED ADDENDUM: Apply every rule in 00_PARKING_CIRCULATION_STANDARD_v2.txt. For this tile, if there is no parking or driveway, preserve the roadway and ensure any vehicle access or curbside maneuver is unobstructed. If the geometry cannot fit, expand into a multi-page tile; never reduce the 4-inch road width.